The ADD-A-STEP™ modular ladder system was designed to provide a product that could be supplied off the shelf for next day delivery.

Each module of the ADD-A-STEP™ ladder consists of two stiles, one rung and two retaining clips. Each stile measures 360mm long, 80mm wide and 32mm thick maximum dimension. The ladder width outside the stiles (uprights) is 435mm and it weighs approximately 5kg per linear metre.

The ADD-A-STEP™ ladder has 30mm diameter rungs at 300mm centre spacing and the width or foot space inside the stiles is 375mm. The ladder is assembled on site using the number of modules required to achieve and length requirement. The product is packaged into a purpose made box containing a 3 metre ladder with 45 boxes on a pallet. Alternatively, ready assembled ladders may be purchased to specific measurements.

The Benefits of ADD-A-STEP™

The Modular design allows for transportation over long distances more economically than fully assembled ladders

It does not have to be measured prior to order and can be made up to any length on site as required

The ADD-A-STEP™ ladder packs can be transported in a lift or by crane and assembled at the top or foot of a structure.

There is no maintenance required other than occasional cleaning with a pressure hose if desired

The ADD-A-STEP™ ladder has excellent insulation properties so it can be used in applications where electrical cables are present.

The FRN product is suitable for contact with drinking water.

The fibre reinforced plastic materials used are UV tolerant and non-corrosive.

Contractors and Water Authorities will have major benefits regarding Health & Safety issues particularly weight. At approx. 5Kg per metre the ladder is significantly lighter than galvanized or stainless steel alternatives.

Potential end users need to know that:

 The ladder system has been tested in accordance with EN 14396The design of the ADD-A-STEP™ ladders enables it to meet stringent performance criteria.The production of the ladder modules is quality-controlled.